RMI9041 IP to ISDB-T/Tb Modulator

RMI9041 IP to ISDB-T/Tb Modulator

Features

  • Modulation standard of ISDB-T(ARIB STD-B31)
  • Input with 4*IP(MPTS or SPTS), UDP protocol, 1000M Ethernet interface
  • Layered transmission in modes of A, A+B, A+B+C
  • RF output in two adjacent carriers
  • 4*IP(in mirror of the input 4*IP), and RF output
  • PID remapping
  • Frequency stability reaches to 0.1PPM
  • Easy-operation by LCD and keyboard on front panel
  • Management by Web NMS

Instruction

This RMI9041 IP to ISDB-T modulator is a newly developed modulator, especially for applications of Japanese and South American applications of digital TV head-end. It is fully compliant with ARIB STD-831 standard and proved to be in high performance. RMI9041 is able to deal with 4*IP transport streams at the same time, each can be MPTS or SPTS, and unicast or multicast mode. IP port is configured with 1000M Ethernet interface, in UDP protocol. The device can output 4*IP in mirror of each input IP stream, and RF after processing of multiplexing. It is designed in output with two adjacent carriers for RF out, to make max. use of frequency resources.
Based on repeated tests, this RMI9041 modulator has been proved to perform in good parameters. It is a device quite suitable for digital TV head-end broadcasting, contribution and distribution applications.

Specifications

Input
IP Input Input Channels4*IP(SPTS/MPTS)
Transport ProtocolTS over IP Input, UDP protocol
IP Input ModeUnicast/Multicast
ConnectorRJ45, 1000 Base-T Ethernet interface
IGMP SnoopingV2, V3
Modulation
StandardARIB STD-B31
FFT2K, 4K, 8K
ConstellationDQPSK, QPSK, 16QAM, 64QAM
Guard Interval1/4, 1/8, 1/16, 1/32
Bandwidth6M,
FEC1/2, 2/3, 3/4, 5/6, 7/8
Hierarchy ModeA, A+B, A+B+C
External CodingRS(204, 188)
Output
RF OutputNumber1*RF
Frequency Range30~1000 MHz, successionally adjustable, in 1Hz stepping
Output Attenuation-30 dB~-10dB, in 0.1 dB stepping
MER≥42 dB
Signal Stability±0.1 dB
Shoulder≥48 dB
Spurious≥50 dB
Connector Type50Ω, N interface
IP OutputTransport ProtocolTS over IP output, UDP protocol
IP Output Channel4*MPTS/SPTS(each IP in mirror of the input 4*IP)
IP Output ModeUnicast/Multicast
Connector TypeRJ45, 1000 Base-T Ethernet interface
Management
Remote Controlby Web NMS
Local ControlLCD and keyboard on front panel
Upgradingby network
LanguageEnglish
General
Voltage100~240V AC, 50/60Hz
Consumption25 W
Environment0~45°C (Operation), -20~80°C (Storage)
Dimension (W*D*H)460*300*44 mm
Net Weight3.9 KGS

Diagram