DVB MODULATOR
RMT9220 DVB-T2 Modulator
FEATURES 
- Standard of DVB-T2(EN302 755)
- Providing 4*ASI(1+3 for backup) input, 1*IP input and 1*Tuner input for Digital Pre-Distortion(DPD)
- 1*GPS 10MHz reference clock in and loop out configured
- Configured with 1*GPS 1PPS input and loop out
- T2-MI over IP input optional
- TS Format T2-MI or TS (Mode A) optional
- Single PLP supported, multi-PLP optional
- Adoption of adaptive linear and non-linear Digital Pre-Distortion(DPD) technologies
- More transfer bandwidth in 5M, 6M, 7M & 8M
- Excellent TS rate adaption and PCR re-calculation
- Easy-operation by LCD and keyboard on front panel
- Management by Web Network Management
INTRODUCTIONS
RMT9220 DVB-T2 Modulator adopts several advanced functions and technologies, based on its fundamental module. It adopts Linear Digital Pre-Distortion and Non-Linear Digital Pre-Distortion, with which output performance of digital TV transmitters are effectively improved. The device supports all modes of DVB-T/T2, either Single Frequency Network(SFN) or Multiple Frequency Network(MFN), with ability of hierarchical modulation. RMT9220 inputs with 1*ASI, 1*IP and 1*Tuner(for DPD), and additionally with 1*GPS 10MHz reference clock and 1*GPS 1PPS. It then modulate and output 1*Tuner in 30~999MHz, in good index. The device is widely used in countries and markets adopting DVB-T/T2 standard, offering a good choice for operators of digital TV broadcasting and head-end providers.
SPECIFICATIONS
| Input | |||
| TS Input | Number | 1*ASI+3*ASI(backup) | |
| Standard | EN 50083 ASI | ||
| Mode | byte or burst | ||
| MPEG Frame | 188/204 byte | ||
| Connector | BNC interface, 75 Ω | ||
| T2MI input over ASI optional | |||
| IP Input | Number | 1*IP | |
| Transport Protocol | TS over IP, UDP protocol; TS-MI over IP optional | ||
| Connector Type | RJ45, 100M Ethernet or 1000M Ethernet optional | ||
| RF Input | Number | 1*RF | |
| Mode | for Digital Pre-Distortion(DPD) | ||
| Connector | BNC interface, 75 Ω | ||
| GPS 10MHz clock Input | Number | 1*10MHz reference clock | |
| Mode | for Single Frequency Network(SFN) | ||
| Connector | BNC interface, 75 Ω | ||
| GPS 1PPS Input | Number | 1*1PPS | |
| Mode | for Single Frequency Network(SFN) | ||
| Connector | BNC interface, 75 Ω | ||
| Modulation | |||
| Standard | DVB-T2 (EN302 755) | ||
| FFT | 1K, 2K, 4K; 8k, 16k, 32k (normal or extended) |
||
| L1 Post Constellation | BPSK, QPSK, 16QAM, 64QAM | ||
| PLP Constellation | QPSK, 16QAM, 64QAM, 256QAM (Normal or Rotated) | ||
| Guard Interval | 1/4, 1/8, 1/16, 1/32, 1/128, 19/128, 19/256 | ||
| Bandwidth | 5M, 6M, 7M, 8M | ||
| FEC | 1/2, 2/3, 3/4, 5/6, 4/5, 3/5 | ||
| FEC Length | 16K(short), 64K(normal) | ||
| Pilot Pattern | PP1-PP8 | ||
| Mode | Mode A: single-PLP; Mode B: multiple-PLP (Option) |
||
| Net Mode | MFN (Optional) | ||
| Hierarchical Modulation | None, Alpha1, Alpha2 & Alpha4 | ||
| Digital Pre-Distortion(DPD)(optional) | |||
| Linear DPD | able to adjust non-flatness by over 10dB | ||
| Non-Linear DPD | able to adjust ACPR by over 10dB | ||
| Output | |||
| RF Output | Number | 1*RF Output | |
| Frequency Range | 30~999 MHz, successionally adjustable, in 1Hz stepping | ||
| Output Attenuation | -25 dB~+3 dB, in 0.1 dB stepping | ||
| MER | ≥43 dB | ||
| Reflection Loss | >15 dB | ||
| I/Q Range Balancing | <0.05% | ||
| I/Q Phase Error | <0.05° | ||
| Signal Stability | ±0.5 dB | ||
| Shoulder & Spurious Rejection | >56 dB | ||
| Spurious | >55 dB(relative to power of all signals) | ||
| Connector Type | 50Ω, N interface | ||
| 1*I0MHz Reference Clock Loop Out | |||
| 1*GPS 1PPS Loop out | |||
| Management | |||
| Remote Control | by SNMP | ||
| Local Control | LCD and keyboard on front panel | ||
| Upgrading | by network | ||
| Language | English | ||
| General | |||
| Voltage | 110~220V AC, 50/60Hz | ||
| Consumption | 25 W | ||
| Environment | 0~45°C (Operation), -20~80°C (Storage) | ||
| Dimension (W*D*H) | 440*414*44 mm | ||
| Net Weight | 5.0 KGS | ||
DIAGRAM
REAR PANEL
